Concrete floor installation in Dodge City KS - a flat slab ready for what goes on top
Old floor cracked, dusting or out of level? We pour a new slab with planned joints and a vapor barrier settled before the pour.
What goes into a concrete floor installationand why the timing matters
Concrete floor installation in Dodge City usually starts with a new shop, an addition or a business space that needs a floor that stays flat and takes wear for years. At Ridgeline Dodge City Concrete we place the slab, finish it, cut control joints, the cuts that give cracks a straight line to follow, and cure it, timing each step to the concrete in front of us.
The price comes down to the floor's size and thickness, whether it needs rebar, the steel inside that holds the slab together under load, and how much digging and base work the spot needs. The schedule turns mostly on the weather and the cure, and your estimate spells out what's covered and what isn't.
The base, the packed layer the slab sits on, is the part you'll never see and the first thing people want to cut. I'd rather spend your money on a dug-out, packed base than a fancy top, because a floor poured on raked dirt settles with the dirt and no finish fixes that.
You'll know where the joints go, what's under the slab and what the floor will cost before we pour, so give us a call.
Concrete floors we install around Dodge City
A floor gets built for what sits and rolls on it, so we match the thickness, the steel and what goes underneath to your space and to whatever covers it later.
Shop and outbuilding floors
These carry tools, carts and sometimes trucks, so we size the slab and any rebar to the load and finish the top hard enough to take rolling wheels.
Floors that will be covered
If tile, wood or a coating goes on later, we settle the vapor barrier, the sheet under the slab that blocks ground moisture, early and watch it for tears as we pour.
New floor meeting old concrete
We're known for new work that ties into what's already there, like a floor that meets existing concrete steps or runs out toward a pool deck.
Why people hire Ridgeline Dodge City Concretefor floors and the slabs around them
Working with us means plain answers about what concrete will and won't do, and a crew that treats your place like somebody lives there. Satisfaction guaranteed on every job.
The owner comes out and builds
I'm the one who walks your space before the estimate, and I work right alongside our crew when it's time to build, so nothing gets lost between us.
In business since 2021
I spent my first years pouring slabs and footings for new houses, then started this business to work on homes and shops people already use every day.
Licensed and insured, papers on hand
We're licensed and fully insured, and we'll show you the paperwork at the estimate if you'd like to see it before we start.
Joints marked before the pour
Concrete cracks some, so I'd rather show you where we're cutting joints in your floor than pretend it won't crack at all.
Your yard and street left clean
We work around kids, dogs and gardens, and when the forms come off we leave your yard, your neighbors and your street the way we found them.
Price your new floor and basewith a free on-site visit
Send the floor's size in square feet and any covering you plan, and we'll get back to you within one business day to set up a visit. The estimate is free, done on site and written out, with no obligation.
From call to cured floorthe way our crew runs it
You get one person to talk to and a written estimate that says what's in it and what isn't, so you know the plan before any concrete shows up.
You call or write
Call (620) 390-0780 or send a note through the form, and we'll set up a time for me to come out and see your space.
I walk the space with you
I look the spot over, ask how you'll use the floor and where the water goes, then write up an estimate that spells out what's in it.
Permits, base and weather
Once you say yes, we sort out the permit questions, dig out and pack the base, set the vapor barrier and plan the pour around the forecast.
Pour, finish and cut joints
We place the concrete, finish the top while the timing's right and cut the joints along the lines we showed you before the pour.
Cure, cleanup and walkthrough
We keep you posted while the slab cures, the slow wait that lets it harden all the way, then pull the forms, clean up and walk the floor with you.
Concrete floor questions we get
How much does a concrete floor cost per square foot?
An installed concrete slab usually costs about $5 to $18 per square foot across the US, and that's the going market range, not our price. A plain, thinner slab lands near the low end and a thicker floor with rebar near the top, and the on-site estimate puts a real number on yours.
Will my new concrete floor crack?
Probably a little, because no design or crew can rule out cracks in a slab entirely, so it's smart to go in expecting some. Control joints give those cracks a planned place to go, and concrete guides put the cut usually within about 4 to 12 hours of the pour, depending on the temperature and the mix.
Does hot or cold weather change a concrete pour in Dodge City?
Yes, both do. In cold weather concrete gains strength slowly and can dry out too fast, which raises the risk of early cracks, so the moisture protection has to stay on longer, and in hot weather one maker generally recommends extra precautions once the concrete itself reaches about 77 to 95°F. We plan pour times around the forecast, because a pour in midday heat can leave a weak, dusty top.
How do I protect a new concrete floor from moisture under tile or flooring?
Have the vapor barrier placed right against the bottom of the slab, because that's where it protects coverings and coatings the most. It's also worth asking any crew how they keep it free of holes, since one barrier maker says even small holes can let a lot more moisture through and lead to failed flooring and delays.
What causes a concrete floor to dust, chip or go out of level?
Bad timing between placing, finishing, jointing and curing is the usual cause, and it can also bring cracks, high and low spots and a surface that wears fast. That's why we finish while the concrete is ready for it and keep the slab from drying out too quickly while it cures.
Is fiber in the concrete as good as rebar for a floor?
No, fiber helps the concrete resist cracking and adds some pulling strength, but it doesn't reinforce the slab the way steel does. If your floor will carry heavy loads, we'll talk through rebar when I come out for the estimate.
Concrete floor installation from Dodge City
We're based in Dodge City and work the cities around it. We ask the city's Development Services & Inspections office, which issues building permits and handles contractor licensing, what your floor needs, then pull the permit or tell you who files it.
Plan your concrete floor in Dodge Citybefore the weather turns
Every pour gets planned around the weather, so calling (620) 390-0780 or sending the form early gives us more room to pick a good day for your concrete floor. Have the square footage and any planned covering handy.